Image
image
image
image


GUIDE RAILS ... one piece and extendable

 

 

Snap-in rails which locate in pre-punched holes within the extruded horizontal rails provide guidance for Printed Circuit Board and Plug -in Modules. Guide rail types available to suit different applications are as follows:

EUROCARD GUIDE RAILS
To suit 160 and 220 deep Printed Circuit Boards and Plug-in Modules of Eurocard height. The 220 depth has a heavy duty version designed to withstand heavier loads across the span.

For PCB and Plug-in Module sizes outside the Eurocard standard, extendable Guide rails allowspanning any depth in Eurocard height and non Eurocard using end-caps that interconnect with an extruded intermediate section, cut to suit reverse side of the front panel.

All Eurocard guides and end-caps are available in long and short nose, long nose for use with PCB ejector levers whilst the short nose are used where EMC panels are being fitted and/or additional component clearance is required on the reverse side of the front panel.

Anti-vibration protrusions are integral to the mouldings to protect the PCB and Plug-in modules during operation or transportation.

ONE PIECE GUIDES - EUROCARD
EXTENDABLE GUIDES - EUROCARD
PCB
TYPE
A
B
C
D
160
SN
141,2
123,2
172,3
14,0
LN
155,2
123,2
172,3
7,0
220
SN
201,2
183,2
232,3
14,0
LN
215,2
183,2
232,3
7,0
a
x
EURO
7,0
PCB - 50
LOW PRO
14,0
PCB - 65
TYPE
DEPTH
160
220
STD SN
69174G
69175F
LN
69177B
69178E
HD LN
-
67189A
LOW PROFILE
65610F
65611D
TYPE
END CAP
EXTRUSION 1M
(PAIR)
ALUMINIUM
PLASTIC
EUROCARD SN
69173R
68676X
87045H
EUROCARD LN
69176D
LOW PROFILE
68153R
Tel:
+44(0)1279 635500
Fax:
+44(0)1279 635282
eMail:

 

 



Contact us | View site map


image


image
image