Image
image
image
image


SRS .... news

 

SRS UFanRail® .... Innovative Cooling-Solution for Railway Applications

With UFanRail® SRS offer a fan unit, certified to EN 50155, for the InnoTrans 2012. Specially developed for applications in the railway sector, UFanRail® ensures an efficient and steady cooling of modular units within 19 inch cabinets and housings. A standard fan shelf achieves a well-aimed airflow exclusively limited to fan area. The air flow conduction of Intermas UFanRail® however guarantees an effective, even cooling preventing hotspots. This helps to increase the MTBF of the electronics and enables higher system efficiency.

FIND OUT MORE


InterRail .... Subrack

The system dimensions of the InterRail subrack are based DIN 41612 and IEC 297 further developed to provide a subrack for heavy-duty applications . This means the subrack can use an extensive range of standard accessories.

The special design features of the InterRail subrack:

  • Rail profiles with a high section modulus guarantee resistance to vibrations.
  • The refined RFI-shielding concept enables high shielding effectiveness.

FIND OUT MORE


Metal InterFace Housings .... for Rail Applications

The metal interface housing was developed to provide a ruggedized solution for DIN 41612 Connectors . The housing design also has metal guide elements for heavy-duty use.

  • Metal Die Cast Construction.
  • Fully Shielded.
  • Suitable for railway applications in accordance with BN 74 016.

FIND OUT MORE


ISEP .... SRS supports ISEP users with a range of accessories

Since taking over part of the former STC / ITT racking business, SRS have been able to supply many key parts used within the ISEP racking system. This has proved very useful for console builders refurbishing mixing and recording consoles previously manufacture by Neve.

FIND OUT MORE


 

SRS supports XiXin Customers with a full range of products


After the closure of Luton based XiXin Ltd during 2012, SRS have negotiated to acquire certain pieces of their Intellectual property to enable SRS support their previous Customer base . This means that SRS can offer equivalents to EIKON II Rack Range, Muralis and Arca Range from their own racking range. The Parcere economy housing range and Ossa open rack are available in exactly the same format as supplied by XiXin and available to special order the Extensis M, P and R range.


As an established designer and manufacturer of enclosures, SRS will enhance the range and will be introducing a flat pack version of the Ossa range shortly . This will ease storage and transportation while maintaining a quick and easy method of assembly for when the unit is required to be built up.

 


The XiXin range of enclosures prior to their closure .......

 

EIKON II

The Eikon II range is a high quality range of aluminium racks. Available in many different sizes and configurations, with a comprehensive range of options and accessories. The method of manufacture makes the Eikon II very easily adaptable to customer specification.

U heights available are: 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36, 39, 42, 45, 47

Widths: 600mm, 700mm, 800mm

Depths: 450mm, 600mm, 800mm, 900mm,1000mms
Any combination of sizes can be supplied.


 

ARCA and MURALIS

The Arca and Muralis are a lower cost alternative to the Eikon II. The Arca is a floor standing range and is now available in an extended range of sizes. The Wall Mounting version is the Muralis range which is available with a wall frame which allows the cabinet to swing out from the wall.

Arca U heights available are: 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36, 39, 42

Width: 600mm Depths: 300, 400, 500, 600mm

Muralis U heights available are: 6, 9, 12, 15, 18, 21, 24, 27


 

EXTENSIS

An extensible rack equipped with high quality telescopic slides and castors allowing the whole unit to be mounted in a cupboard and pulled out to allow access to equipment. Many heights are available and at present two standard base depths. Due to our unique design, supporting tracks are not required for extension.

U Heights available from 6U - 47U

Standard Base depths 500mm and 600mm


 

PARCERE

The PARCERE is a low cost 19” rack. It is manufactured from welded steel, fully assembled and rapidly available.

U heights available 6, 9, 12, 16, 20, 24. Width: 535mm Depth: 515mm

OSSA RACKS (See web page) are an economical and simple solution where a totally enclosed cabinet is not required. Manufactured from steel they comprise a front and rear frame connected with corner stretchers,

U heights available from 9 - 39U. Width: 488mm
Depths: 500mm standard, Other depths to special order.


 

Call the SRS sales office for more information on the XiXin range of products.
Tel:
+44(0)1279 635500
Fax:
+44(0)1279 635282
eMail:


Contact us | View site map


image


image
image